Fibaro is probably the most advanced building automation system in the world today.
Fibaro is a complete and powerful solution for the monitoring, management and intelligent automation of living and working environments. Fibaro’s system of modules and sensors allows your home or office to intelligently adapt and respond to the changing environment, effortlessly maximising your comfort, safety, and energy efficiency.
The system uses Z-Wave wireless mesh technology and a revolutionary new non-invasive installation procedure to completely eliminate the need to run new cables – making it retrofittable into any building, irrespective of the existing cabling architecture.
The Fibaro System Components
Home Center 2
Home Center Lite
Beautifully simple. The Fibaro Wall Plug requires no specialist tools or knowledge – just take it out of the box, plug it in to a mains socket and connect any electrical device. The Wall Plug will measure the power draw of the device in real-time. View graphs and charts of the energy consumption of your home or business and identify inefficient and wasteful devices. Receive email notifications if an appliance breaks down, or remotely disable devices when you leave the building to save power.
With the ability to detect minute movements, measure temperature, meter light intensity and detect if the device itself is moved, The striking new Motion Sensor from Fibaro opens up a wealth of intelligent automation options. By reading light levels in a room, Fibaro can adjust your lighting as natural illumination levels change and ensure optimum comfort and energy efficiency. If there’s no motion in a room and Fibaro detects that an iron has been left on, the system can switch it off and prevent a fire. The Motion Sensor features an internal accelerometer that can raise the alarm if the device is tampered with.
Beneath the elegant white exterior, the Flood Sensor is equipped with three ultra-sensitive 24-karat gold telescopic probes that allow the sensor to precisely measure moisture and temperature levels. Using this feedback Fibaro can detect floods and take action to isolate electrical appliances and shut off water supplies to limit damage. Thanks to advanced Z-Wave technology and a battery-operated lifespan of up to five years the water-resistant sensor can operate wirelessly from remote locations for years at a time without maintenance.
The Smoke Sensor is a high-tech fire alarm with both photoelectric and temperature sensors for maximum protection from flaming and smouldering fires. The device features an integral 100dbm siren and an RGB visual indicator for an instant alert, but also feeds back data to the Fibaro system processor – allowing it to take further actions such as closing windows to starve the fire of oxygen and illuminating the escape routes. The Smoke Sensor has a built-in Z-Wave range tester and incorporates an electronic recording device for the purposes of investigating the cause of a fire. NOTE: The FGSS-001 has been discontinued effective Q1 2016. The FGSD-002 is now battery only.
Door Window Sensor
The Door / Window Sensor is a battery powered reed sensor that expands the capabilities of the system by monitoring the state of doors, windows, garages and other apertures. The sensor can be used to automatically turn a light on when you enter a room, guard against unauthorised access, warn you if you leave your front door open when you leave the house or even reduce your heating bills by excluding zones with open windows from the heating programme. The Door/Window sensor includes support for an optional temperature sensor.
Swipe Gesture Controller
The FIBARO Button is a compact, battery-powered, Z-Wave Plus compatible device. It allows you to control devices through the Z-Wave network and run various scenes defined in FIBARO System. Different actions may be triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene. With its small design and wireless communication, the FIBARO Button can be conveniently mounted on any surface and in any position or location at home, e.g. beside the bed or under the desk.
Universal Binary Sensor
The Universal Binary Sensor is a wireless module that allows you to bridge the output of any binary sensor onto the Z-Wave network and incorporate it into your Fibaro system. The module supports up to two binary sensors and four temperature sensors. The Universal Binary Sensor allows advanced users to quickly and easily incorporate alarm systems, infra-red receivers and other third-party devices into a Fibaro Z-Wave network.
Roller Shutter 2
Incorporate motorised blinds, curtains, awnings and windows into your Fibaro system and make the best use of natural light. The Fibaro Roller Shutter 2 allows precise control and positioning of motorised window treatments and other features such as garage doors.
Control LED, RGB, RGBW strips and low voltage halogen lights to create beautiful, immersive lighting scenes. Fine-tune colour and brightness from the App or create preset scenes that can be called up at the touch of a button. The device provides support for up to four additional analogue sensors such as temperature sensors, humidity sensors, wind sensors, air quality sensors and light meters.
Relay Switch 2×1,5 kW
Remotely Controlled Double Relay Switch of FIBARO system is designed to operate in a wall switch box or in locations where the control of an electric device (up to 1.5kW) is needed. It is also possible to send a signal to any system that is to be integrated with Fibaro system.
Relay Switch 1×2,5kW
The Relay Switch can be used to switch electronic devices on and off, either at will or in response to stimuli. Fibaro can use relays to turn your boiler on before you wake, ready for your morning shower, or to activate your ventilation system in response to rising humidity. Relay Switches allow the incorporation of a wide variety of electrical equipment into the Fibaro system. This model can switch a single device of up to 3Kw load.